Huffy M0012 Uživatelský manuál Strana 1

Owner’s Manual for Mountain BikesPlease read and fully understand this manual before operation.Save this manual for future reference.This manual conta

10 Handlebar and Stem Installation WARNING: To prevent steering system damage and possible loss of control, the “MIN-IN” (minimum insertion) mark (A)

11 WARNING: To prevent steering system damage and possible loss of control, completely seat Stem (1) onto Fork Tube (E).Threadless Style Stem:Note:

12 Assemble the Front Wheel to the ForkLoosen the Front Brakes:1. Squeeze the two Brake arms together (A).2. Lift out the Brake Cable Guide (B) fro

13 Re-attach Front Brake Cable:7. Squeeze the two Brake arms together (A).8. Insert the Brake Cable Guide (B) into the cutout in the Guide Bracket

14 Setting Up the HandlebarsNote: This procedure is for one, two and four bolt Handlebar Stems.1. If necessary, loosen the Handlebar Clamp Screw(s)

15 Testing Stem and Handlebar TightnessTo test the tightness of the stem:• Straddle the front wheel between your legs.• Try to turn the front wheel

16 Seat InstallationAttach Seat to Seat Post:(pre-assembled on some models)• Loosen nuts on seat clamp (A) and rotate Seat (8) into riding position.

17 CAUTION: Operate the Quick Release Lever by hand only. Do not use a ham-mer or any other tool to tighten the quick release lever.You must use str

18 Pedal Installation CAUTION: There is a right pedal marked “R” and a left pedal marked “L”.• The pedal marked “R” has right-hand threads. Tighten

19 Refl ector Brackets Installation1. Position FRONT Refl ector (7) so it points straight forward (fi g 10).2. Tighten Clamp Screw.NOTE: Do not over-t

Owner’s Manual IndexYour Bike• Owner’s Bicycle Identifi cation Record ... 3• Fitting the Rider to the B

20 Brake SystemAdjustments WARNING: You must adjust the front and rear brakes before you ride the bicycle.Step 1: Put the brake shoes (B) in the corr

21 Brake System - continuedStep 3. Stretching the cable (fi g 13):1. Hold both Brake Shoes against the rim.2. Loosen the cable clamp Screw (C).3. P

22 Put the brake shoes the correct distance from the rim:1. If desired, adjust Brake Levers (G) to a comfortable distance from the grip using the Ad

23 WARNING: Do not over tighten the cable clamp. Over tightening the cable clamp may cut the cable and cause injury to the rider or to others.8. Re

24 NotesMaintenance

25 Shift SystemParts of the Shift System:• Left-hand Shift Lever (A) operates the Front Derailleur (B).• Right-hand Shift Lever (C) operates the Re

26 CAUTION: Do not force the shift levers. Shift only when pedaling forward and without strong force. Do not backpedal. Backpedaling can cause the c

27 These are the higher gear combinations.EDg 17They allow you to pedal harder and at a slower rhythm, but with more distance trav-eled per pedal re

28 Front Derailleur AdjustmentsThese instructions describe most adjustments that the shift system may need. If you can not adjust the shift system us

29 Put the “high” adjusting screw (E) in the correct position as follows:• Shift the chain onto the largest front sprocket and the smallest rear spr

3 Owner’s Bicycle Identifi cation RecordNOTE: This information is only available on the bicycle itself. It is not available from Huffy.Each Huffy bic

30 Rear Derailleur AdjustmentsThe rear derailleur has two adjusting screws. The “low” adjusting screw, sometimes marked “L”, limits how far the rear

31 Put the “low” adjusting Screw in the correct position as follows:• Shift the chain onto the largest rear Sprocket (F).• Loosen Nut of the cable

32 Three-Piece Cranks(various models)Maintenance:Both Crank Arms (A) were tightened to the spindle (B) at the factory. After riding the bicycle the fi

33 Suspension Frame(various models)Adjustment:The bicycle may have an adjustable shock-absorbing suspension. You can change the suspension, as you pr

34 TiresMaintenance:• Frequently check the tire infl ation pressure because all tires lose air slowly over time. For extended storage, keep the weigh

35 Repair and Service WARNING: • Inspect the bicycle frequently. Failure to inspect the bicycle and to make repairs or adjustments, as necessary, ca

36 Lubrication TableWhat When HowPedals every six months Put four drops of oil where the axles go into the pedals.Chain every six months Put one drop

37 Inspection of the BearingsMaintenanceFrequently check the bearings of the bicycle. Have a bicycle service shop lubricate the bearings once a year

38 Huffy Corporation Limited Warranty• Part or model specifi cations are subject to change without notice.• This Limited Warranty is the only warran

39 For how long does this Limited Warranty last?• The frame is warranted for life except aluminum frames which are warranted for ten (10) years, fro

4 Warning and Safety InformationMeanings of Warnings:a This symbol is important. See the word “CAUTION” or “WARNING” which follows it.The word “CAU

H Helmet EN 100212 i0027• Helmet should sit level on your head and low on your forehead• Adjust the strap sliders below the ear on both sides.• Buc

5 The Owner’s Responsibility WARNING: This bicycle is made to be ridden by one rider at a time for general transportation and recreational use. It i

6 Parts Assembly View81427302420222123131515561018193534261972253171616171112 3129428333236Parts View

7 Parts Assembly ListNo. Description No. Description1 Handlebar Stem 19 Grips (x2)2 Handlebar 20 Crank & Spindle Set3 Front Wheel Assembly 21 Cra

8 IntroductionThis Owner’s Manual is made for several different bicycles: • Some illustrations may vary slightly from the actual product. • Follow

9 Tools NeededSmall Adjustable Wrench(Jaws must open at least 9/16 inch.)Open-End WrenchesFlat-blade Screwdriver Phillips ScrewdriverSlip-Joint Plier